Oxy-Gone Rust Remover and Metal Treatment

Item #: QCC-450-4
Availability: In Stock
Usually ships In 1 Business Day
- 49 Units in stock

  • A rust-inhibiting coating that is not a paint. Actually neutralizes existing rust by changing the chemical composition of rust to an inert protective barrier coating to stop future rusting.
  • You can apply by rag, brush, hand sprayer, roller and even pump up sprayer on larger surfaces. Or you can immerse smaller parts completely as in the case of a dip tank. Remember to wear gloves and or goggles for protection.
  • Recommended for use under oil base paint or primer. One gallon of Oxy-Gone covers 600 sq. feet. It dries overnight, makes a lasting bond between rusted metal and paint. (Note: Oxy-Gone is not actually a paint.)
  • Use a wire brush or wire wheel to remove loose paint, rust scales, dirt, oil, and anything else accumulated on the surface. After doing this, apply a coat of Oxy-Gone and let it dry (overnight).
  • Sometimes, a dry, grayish white powdery film develops. Simply brush off before painting. Oxy-Gone is water-based and ready to use. COMBO variation comes with 2 Empty quart bottles and 2 triggers (color of trigger may vary).
  • Safely dissolves rust and prepares rusty metal surfaces. aka "RUST PREP"
    A balance of phosphoric acid, dichromate, wetting agents and extenders for dissolving rust or preparing rusty metal surfaces for painting. Oxy-gone actually neutralizes existing rust by changing the chemical composition of rust to an inert protective barrier coating to stop future rusting. No sandblasting is necessary! While other treatments can only prepare a clean surface for painting, Oxy-Gone transforms a rusty, scaly surface into an inert paintable surface in just one step. Oxy-Gone is water-based and ready to use. Non-flammable. pH 1.75
    Spec Sheet
    MSDS
    Price: $89.00
      Liquids:

      SELECT SIZE



      Quantity:

      We Also Suggest